SELVO MCB ISOLATORS

MCB trips the circuit but open contact of MCB cannot be visible from outside , this is why it is recommended not to touch any electrical circuit just by switching off the MCB . for better safety , you need SELVO Isolator which is an switch disconnector to make, carry & break circuit current . Isolators are commonly used as mainswitch in order to allow maintenance of electrical system in safe conditions


MCB ISOLATORS
HSN CODE-85362090
ISOLATOR 240/415 VOLTS AC 50Hz
Item Description Item Code Std.Pkg
40 A DP GSELISO13001 6 Pcs
63 A DP GSELISO13002 6 Pcs
100 A DP GSELISO13003 6 Pcs
40 A TP GSELISO13004 4 Pcs
63 A TP GSELRCB13005 4 Pcs
100 A TP GSELRCB13006 4 Pcs
40 A FP GSELRCB13007 3 Pcs
63 A FP GSELRCB13008 3 Pcs
100 A FP GSELRCB13009 3 Pcs

Salient features

  • Forced opening and suitable for use as main switch.
  • Optimal protection against unintentional touching of live parts.
  • Quick mounting on Din rail using bi-stable din clip.
  • Equipped with dual-function terminals which enable simultaneous connection of conductors and busbar.
  • IP 20 Degree protection safety.
  • Cross/Slotted-head screws enable easy, reliable and time-saving wiring.
  • Ergonomic Dolly /Knob which is easy to operat , ON/OFF marking to know status of MCB.
  • Same form & design as MCB range.
ISOLATOR TECHNICAL SPECIFICATION
Standard Conformity As Per IS/IEC 60947-3
Standard Rating 40A, 63A, 100A
Number of Poles 2P, 3P, 4P
Rated Operational Voltage 240/415 Volt AC
Rated Frequency 50Hz
Utilization Category AC22A
Rated Impulse Voltage (Uimp) 4 KV
Rated Insulation Voltage 660 Volt AC
Electrical/Mechanical Endurance (No. of operations) 10000
Tightening Torque 2 Nm
Terminal Capacity (max), mm² 35 sqmm
Contact Indication RED(on) & GREEN(off)
Degree of Protection IP 20
Ambient temperature -5°C to +55°C
Resistance to Humidity 95%
Resistance to Fire Flame extinguish within 30 sec after removal of glow wire
Shock Resistance 40mm Free Fall
Mounting Clip on DIN Rail (35 mm x 7.5 mm)
Case & Cover Moulded, flame-retardant thermoplastic material PBT
Busbar connections Pin/fork type
Installation Position horizontal/vertical