SELVO TPN DOUBLE DOOR DISTRIBUTION BOARD

In accordance with IS 13032/91 & BS:5486/86

IP 43 (IS 2147-1962) Double Door(DB)                                HSN CODE-85369090
TPN Distribution Board (Suitable for FP Incoming & SP Outgoing)
No. of Ways Capacity of
Incoming+Outgoing 		Item Code Item Code
4W 4+12 GSELTPN11039 GSELTPN11078
6W 8+18 GSELTPN11040 GSELTPN11079
8W 8+24 GSELTPN11041 GSELTPN11080
12W 8+36 GSELTPN11042 --
FEATURES
  • FORM CRCA SHEET : Manufactured from CRCA sheets and undergo seven tank phosphate process & with anti-corrosive powder coating for superior finish and added durability.
  • DETACHABLE GLAND PLATES ON TOP & BOTTOM : Removable gland plates facilitate easy entry and exit of cables.
  • ENHANCED AESTHETICS : The aesthetically designed front fascia of the DB adds an alluring dimension to the living space.
  • EMBOSSED EARTHING IDENTIFICATION : Clear earthing marking for ease of installation DBs are equipped with a stainless steel screw that prevents rusting of the surface.
  • LOCKING KNOB : Smooth and easy to operate door opening and closing with aesthetically designed koob.
  • DOOR EARTHING : Door earthing makes the entire distribution board totally shockproof.
  • RAISED NEUTRAL LINK : High quality brass neutral and earth links to prevent temperature rise and promote safe operation
  • DUST GUARD : The cement or dust guard prevents entry of dust or cement particles inside the D.B during construction period at site.
  • INTERNAL SLIDING KNOB /LATCH : Appealing with curves and locking. Colour are matched, as per requirement.
  • IDENTIFICATION LEVEL : Identification level and blank plates will be provided for the circuit.
  • 4 POLE INCOMER PROVISION : 4 pole Isolator is installed to use as incomer.
Technical Specification
Number of Ways 4 Way, 6 Way, 8 Way, 12Way
Types of installation Wall mounted (Surface/Flush Mounting)
Voltage Rating 415V Three Phase
Frequency 50Hz
Ingress Protection (IP) IP43
Rated Insulation Voltage 690V
Dielectric Strength 2.5 KV
Enclosure Material & Construction Folded sheet steel construction, manufactured from electro galvanized cold rolled Zinc phosphate steel sheets
Finish CRCA Sheet steel parts are passed through seven stage pre-treatment process & then provided with electrostatic polyester powder coating
CRCA sheet enclosure thickness 1.2 mm
Standard Colour Fine Ivory Texture
Door Options Lock Sliding
Removable Gland Plates Top & Bottom
Entry of cables Top/Bottom/Sides
Access Front
Incoming Max. 63A
Outgoing Max. Individual 63A
Incoming Options FP RCCB / FP Isolator
Outgoing Options Single Pole MCB up to 63A
Neutral Bar Terminal capacity 6 sq.mm
Earthing Bar Terminal capacity 6 sq.mm
Bus bar Rating 100A
Bus Bar Material Electrolytic Flat Copper Tin Plated Fork Type/Pin Type Bus Bar
Fork Type/Pin Type Bus Bar This component changed the outdated connection ways of MCB to a new connection way with characteristic of wider contact area, better conductivity, low power consumption & low temperature rise
Bus Bar Support Made out of Glass Reinforced Polyester Material
Stainless Steel screws Distribution Boards are equipped with stainless steel screws that prevent rusting of the surface
Protection level of Distribution Board Advanced
Ambient Temperature -5°C to 40°C